-
February 18th, 2000, 02:58 AM
#11
Inactive Member
I've actually heard the bosches aren't all that sweet either, at least the one with the Drag Gen2 kits. SX and Paxton make some massive pumps. I use a Pierberg (Porsche) pump myself, it's good to 600hp and I can barely hear it at idle with the radio off.
------------------
Ryan Earl
'99 Turbo SH
NTPOG - North Texas Prelude Owners Group
My Page
-
February 18th, 2000, 03:09 AM
#12
Senior Hostboard Member
-
February 18th, 2000, 03:37 AM
#13
Inactive Member
thanks guys for your opinions....where do you mount the fuel pump..My buddy has it behind his throttly body...is this a good spot for it?? thanks again for the help...I just don't want my motor to blow by goin the cheap way
-
February 18th, 2000, 03:58 AM
#14
Inactive Member
The Paxton pump ain't all that good either. We had two fail during my dyno testing. The "cool" street racers up in motown say the same thing.
-
February 18th, 2000, 07:46 AM
#15
-
February 18th, 2000, 07:54 AM
#16
Inactive Member
Heretic,
Bt "right gizmos," do you mean the AFC you have. I checked out your website and that's the only thing you have. Does the AFC control fuel delivery at idle? Thinking of getting one myself...
-
February 18th, 2000, 04:52 PM
#17
Senior Hostboard Member
OK, I am not sure what the requirements are for your DRAG 3 Turbo kit, so I cannot comment on whether or not a Holley/Walbro (Holley buys them from Walbro -- I have boxes from BOTH companies with the same product inside). If the fuel pressures get really high, then this pump may not deliver the right about of volume. Beaver is TOTALLY off on his assesment... Here is a comparison between the Walbro GSS-317 (Jackson Racing 255 lph) and the GSS-342 high pressure 255 lph pumps:
Pres. flow(317) flow (342)
40 psi........214 lph.....220 lph
50............198.........207
60............172.........194
70............126.........181
80.............55.........165
90..............0.........139
100...........(--)........113
110...........(--).........71
120...........(--).........18
This data is from the Walbro Tech office.
Good luck.
------------------
'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph
[This message has been edited by JRCivic (edited February 18, 2000).]
-
February 18th, 2000, 05:20 PM
#18
Inactive Member
Super-AFC and the SX FPR.
------------------
Ryan Earl
'99 Turbo SH
NTPOG - North Texas Prelude Owners Group
My Page
-
February 18th, 2000, 10:08 PM
#19
Inactive Member
I just checked my receipt from the pump I have, it's a:
Pierburg/Porsche EAP98089
------------------
Ryan Earl
'99 Turbo SH
NTPOG - North Texas Prelude Owners Group
My Page
-
February 21st, 2000, 03:21 PM
#20
Inactive Member
JR, from looking at that chart, I was wondering - when is the fuel pressure going to be past 90 psi? In other words, when would it be a good idea to invest more into the fuel system? (ie. injectors, management system)
------------------
Is it obvious that I'm the new kid?
93 B18C Civic Coupe
Soon to be installed: Jamex sportsline shocks, Ground control coilover conversion, chikara front upper strut brace, NOS?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks